Продукция
Полный каталог крепежа. Технические страницы — на английском языке.
Hex Bolt DIN 933
DIN 933 / ISO 4017 / ANSI B18.2.1 / GB/T 5783
M3 – M48, lengths 6 – 300 mm (full thread)
Hex Nut DIN 934
DIN 934 / ISO 4032 / ANSI B18.2.2 / GB/T 6170
M3 – M48 (M3–M64 on request)
Socket Head Cap Screw DIN 912
DIN 912 / ISO 4762 / ANSI B18.3
M3 – M48
Flat & Spring Washer DIN 125 / 127
DIN 125 (flat) / DIN 127 (spring) / ISO 7089 / ISO 7093
M3 – M48
Wedge Anchor
DIN / ANSI B18.2.1, tested to ETA / ISO 898-1 where required
M6 – M24, lengths 40 – 300 mm
Sleeve Expansion Bolt
DIN / manufacturer standard
M6 – M20
U-Bolt
DIN 3570 / DIN 3571 / manufacturer drawing
M6 – M20, pipe sizes 1/2" – 8"
T-Bolt (T-Slot Bolt)
DIN 787 / manufacturer standard
M8 – M20, slot widths 6 – 20 mm
Chemical Anchor
ETA / manufacturer specification, resin to EN 1504-6
M8 – M24
Mechanical Undercut Anchor
ETA approved type, manufacturer specification
M6 – M24
Threaded Rod DIN 975
DIN 975 / DIN 976-1 / ASTM A193 B7 / A307
M6 – M48, 1 m or 2 m standard length, cut to size
High Tensile Bolt 10.9 / 12.9
DIN 931 / 933 / 6914, ISO 898-1, ASTM A325 / A490 equivalent
M6 – M48
Stud Bolt DIN 976
DIN 976-1 / ASME B18.31.2 / ASTM A193 / A320
M6 – M48, custom lengths
Hollow Wall Anchor
Manufacturer standard, tested to ETA where required
M5 – M12
Stainless Hex Bolt SUS304 / 316
DIN 933 / 931 / 912, ISO 3506-1, A2-70 / A4-80
M6 – M36, full or partial thread
Carriage Bolt DIN 603
DIN 603 / DIN 605 / ASME B18.5
M3 – M24 (M3–M20 standard stock)
Solar Hanger Bolt
Manufacturer specification, ISO 3506-1 (stainless)
M8 – M12, custom lengths
Solar Ground Screw Tie Rod
Manufacturer specification, ISO 898-1
M12 – M16
Solar Hanger Anchor (Standing Seam Roof)
Manufacturer specification, ISO 3506-1
M8 – M12
Solar End Clamp
Manufacturer specification, Aluminium 6005-T5 / 6063-T5
Panel thickness 30 – 50 mm
Solar Mid Clamp
Manufacturer specification, Aluminium 6005-T5 / 6063-T5
Panel thickness 30 – 50 mm
Solar Mid / End Support Plate
Manufacturer specification
Universal plate, M8 fixing
Solar Stud Bolt
Manufacturer specification, ISO 3506-1
M8 – M10
Solar Ballast Spike
Manufacturer specification
M10 – M16, custom spike lengths
Solar Wing Nut (Anti-loosening)
Manufacturer specification
M8 – M10
Solar Complete Clamp Set
Manufacturer specification, Aluminium 6005-T5 + A2 stainless
Panel 30 – 50 mm, M8 fixing
Hot-dip Galvanized Bolt
DIN 931 / 933 / 7990, ISO 1461 coating
M8 – M30
Solar Roof Drill Fixing
Manufacturer specification
#10 – #14 (M4.8 – M6.3), lengths 25 – 150 mm