Sleeve Expansion Bolt
Sleeve anchors expand a steel sleeve against the walls of a drilled hole, giving reliable holding in masonry, brick and concrete where a wedge anchor cannot develop full capacity.
- Fixing to brick, block and hollow masonry
- Light-to-medium duty fixture and bracket fixing
- Retrofit installation where hole tolerance is loose
Email rfq@yitorch.com · WhatsApp +86 176 1138 2036
Specification
| Standard | DIN / manufacturer standard |
|---|---|
| Size range | M6 – M20 |
| Grade / property class | Grade 4.8 / 5.8 |
| Material | Carbon steel sleeve, zinc plated |
| Surface finish | Zinc plated (clear / yellow) |
| MOQ | Flexible — trial orders accepted; exact MOQ confirmed with the quotation |
| Lead time | 7–20 working days for stock sizes; 25–35 days for OEM tooling |
| Packaging | Cartons on pallets, neutral or your own branded packing |
| Quality documents | Mill test certificate, dimensional report, coating thickness report on request |
| Inspection | 4-stage in-house QC; SGS / BV / TUV third-party inspection welcome |
How to order
- Send size, material or grade, finish, standard and target quantity.
- We confirm the specification and return a quotation with lead time within 48 hours.
- Approve a sample or pre-production batch if required.
- Production with 4-stage QC; inspection report and mill certificate issued before dispatch.
Quality documents supplied
- Mill test certificate (chemical composition and mechanical properties)
- Dimensional inspection report against the ordered standard
- Coating thickness and salt-spray report where applicable
- Batch traceability record and packing list
Sleeve Expansion Bolt — questions buyers ask
Can you produce Sleeve Expansion Bolt to my own drawing?
Yes. Send a drawing or sample and we will confirm dimensions, material, grade and finish, then quote tooling and unit price within 48 hours. We work to DIN, ISO, ASTM, GB, GOST and customer drawings.
What is the lead time and MOQ for Sleeve Expansion Bolt?
Standard sizes typically ship in 7–20 working days; custom or tooled items take 25–35 days. MOQ is flexible and trial quantities are accepted so you can verify quality before scaling.
What is your MOQ? Can I start with a trial order?
Yes. We support flexible MOQ and small trial orders so you can test quality and market demand before scaling up. Exact MOQ depends on the item and specification.
How fast will I get a quote?
Within 48 hours after receiving your specification (size, material, standard, finish, quantity). Urgent inquiries are usually answered the same working day.
Can you make custom sizes or OEM per my drawings?
Yes. We handle OEM and ODM: custom dimensions, materials, surface treatment and packaging per your drawings or samples, produced to DIN, ISO, ASTM, GB or GOST standards.
Technical data for Sleeve Expansion Bolt
| Property class | Nominal tensile Rm, min | Lower yield ReL, min | Elongation A, min | Typical core hardness |
|---|---|---|---|---|
| 4.8 | 400 MPa | 320 MPa | 14 % | — |
| 5.8 | 520 MPa | 400 MPa | 10 % | — |
Minimum requirements of ISO 898-1 / ISO 3506-1 for the property classes above. Acceptance is against the EN 10204 3.1 mill test certificate of the actual production heat — request it with the quotation if your QC department needs the format in advance.
Thread and tolerance
- External thread 6g, internal 6H (6f / 6G on request)
- Coarse pitch standard; fine pitch available per size
- Product grade A for d ≤ 24 mm, B above, unless your drawing states otherwise
- Head marking: property class plus manufacturer mark (required from M5)
Coating options and where they belong
- Zinc plated (Cr3) — 5–12 µm, indoor and general machinery
- Hot-dip galvanized (ISO 1461) — local min ≈ 45 µm, outdoor and structural
- Zinc flake (ISO 10683) — 4–10 µm, high-strength classes and tight tolerances
- Stainless passivated (ASTM A967) — A2 / A4 where coatings are unsuitable
Hydrogen embrittlement
Electroplated fasteners of property class 10.9 and above — and 12.9 in all cases — require a documented de-embrittlement bake. We supply the process record (plating date, bake start, temperature, duration) with any such order, and we will advise against hot-dip galvanizing for 12.9 rather than accept the risk silently.
Documents that ship with this product
- EN 10204 3.1 mill test certificate per heat
- Dimensional inspection report with go / no-go thread gauge results
- Coating thickness report; neutral salt spray report on request
- De-embrittlement record where class 10.9 / 12.9 is electroplated
- Pre-shipment inspection report; third-party inspection (SGS / BV / TÜV / Intertek) on request
Full list and how to specify it in your PO: inspection documents. Standard equivalences for this item: cross-reference table. Property class background: technical data. Export compliance: compliance centre.
Ready to source quality hardware from China?
Send your specification or drawing for sleeve expansion bolt — quotation, MOQ and lead time within 48 hours.